SPREADER ICL ACCUPRO 360ST
Stock Code:
FERTACCU
In Stock
General Features:
SmartSpread™ - Ensures precise application every time.
Maintenance-free gearbox - No greasing required, ensuring smooth and consistent performance with minimal upkeep.
Stainless-steel frame - Built for durability, withstands frequent use and harsh conditions, providing long-lasting reliability
30kg capacity hopper - Shaped to enhance the flow of granules to the impeller, preventing clumping and ensuring a continuous, smooth flow of material.
Removable rain cover - Protects the product if being applied during adverse weather conditions.
Pneumatic turf tyres - Distributes weight evenly, preventing turf damage and ensuring smooth mobility across different surfaces.
Ergonomic handle - Designed for comfort, reducing operator fatigue during extended use.
Open/Shut-Off control - Easy control of material flow, enhancing operational efficiency.
Integrated front handle - Allows for safe and simple lifting, making transportation and handling easy
Maintenance-free gearbox - No greasing required, ensuring smooth and consistent performance with minimal upkeep.
Stainless-steel frame - Built for durability, withstands frequent use and harsh conditions, providing long-lasting reliability
30kg capacity hopper - Shaped to enhance the flow of granules to the impeller, preventing clumping and ensuring a continuous, smooth flow of material.
Removable rain cover - Protects the product if being applied during adverse weather conditions.
Pneumatic turf tyres - Distributes weight evenly, preventing turf damage and ensuring smooth mobility across different surfaces.
Ergonomic handle - Designed for comfort, reducing operator fatigue during extended use.
Open/Shut-Off control - Easy control of material flow, enhancing operational efficiency.
Integrated front handle - Allows for safe and simple lifting, making transportation and handling easy
Specifications:
SmartSpread™ - Ensures precise application every time.
Maintenance-free gearbox - No greasing required, ensuring smooth and consistent performance with minimal upkeep.
Stainless-steel frame - Built for durability, withstands frequent use and harsh conditions, providing long-lasting reliability
30kg capacity hopper - Shaped to enhance the flow of granules to the impeller, preventing clumping and ensuring a continuous, smooth flow of material.
Removable rain cover - Protects the product if being applied during adverse weather conditions.
Pneumatic turf tyres - Distributes weight evenly, preventing turf damage and ensuring smooth mobility across different surfaces.
Ergonomic handle - Designed for comfort, reducing operator fatigue during extended use.
Open/Shut-Off control - Easy control of material flow, enhancing operational efficiency.
Integrated front handle - Allows for safe and simple lifting, making transportation and handling easy
Maintenance-free gearbox - No greasing required, ensuring smooth and consistent performance with minimal upkeep.
Stainless-steel frame - Built for durability, withstands frequent use and harsh conditions, providing long-lasting reliability
30kg capacity hopper - Shaped to enhance the flow of granules to the impeller, preventing clumping and ensuring a continuous, smooth flow of material.
Removable rain cover - Protects the product if being applied during adverse weather conditions.
Pneumatic turf tyres - Distributes weight evenly, preventing turf damage and ensuring smooth mobility across different surfaces.
Ergonomic handle - Designed for comfort, reducing operator fatigue during extended use.
Open/Shut-Off control - Easy control of material flow, enhancing operational efficiency.
Integrated front handle - Allows for safe and simple lifting, making transportation and handling easy
Suitable For:
• Fairways
• Sports Fields
• Landscaping
• Maintenance
• Tees
• Lawns
• Sports Fields
• Landscaping
• Maintenance
• Tees
• Lawns
Application:
How to use
1: Pre-use inspection: Before using the spreader, ensure it is clean and free of debris from prior usage by conducting a thorough inspection.
2: Material check: Ensure the material to be used is in good condition, free-flowing, and compatible for use in a precision rotary spreader.
3: Setting the aperture: Ensure the on/off lever is in the closed position. Select the correct setting on the SmartSpread™ by choosing the letter corresponding to the fertilizer being applied. Select the desired application rate on the 1 to 25 scale located on the handle by locking the setting screw at the corresponding number. Further information on application rates of specific ICL products can be found on ICL websites or through ICL-appointed retailers.
4: Filling the hopper: Ensure the control lever remains in the off/closed position before filling. Fill the hopper uniformly. Always fill the hopper in a safe place away from areas where any accidental spillage while filling could cause damage.
5: Spreading material: Push the spreader at a brisk walking speed of approximately 5 km/h, always keeping the impeller parallel to the ground. With the upper gauge and the SmartSpread™ lower gauge set in the desired positions, push the handlebar on/off lever forwards to the setting stop, while simultaneously starting forward motion. Always begin moving forward at the same time as pushing the lever forward to the on position. At the end of each run, pull the on/off lever back to the zero position to stop material flow and cease spreading. The spread width of the material varies with different fertilizer types. Always check the spread width of the product to ensure correct spread distances. Detailed information on the spread width of specific fertilizers can be found on the ICL websites or through ICL appointed retailers.
6: Cleaning and after-use instructions: Always empty any leftover product from the spreader when the application is complete, disposing of any excess material correctly. The best way to empty unused material from the hopper is by inverting the spreader. Further action may be required to clear any remaining material if necessary. Wash the hopper thoroughly with clean water particularly around the agitator and the underside of the hopper. Drying of excess water is recommended. Do not reuse the spreader until it is dry.
1: Pre-use inspection: Before using the spreader, ensure it is clean and free of debris from prior usage by conducting a thorough inspection.
2: Material check: Ensure the material to be used is in good condition, free-flowing, and compatible for use in a precision rotary spreader.
3: Setting the aperture: Ensure the on/off lever is in the closed position. Select the correct setting on the SmartSpread™ by choosing the letter corresponding to the fertilizer being applied. Select the desired application rate on the 1 to 25 scale located on the handle by locking the setting screw at the corresponding number. Further information on application rates of specific ICL products can be found on ICL websites or through ICL-appointed retailers.
4: Filling the hopper: Ensure the control lever remains in the off/closed position before filling. Fill the hopper uniformly. Always fill the hopper in a safe place away from areas where any accidental spillage while filling could cause damage.
5: Spreading material: Push the spreader at a brisk walking speed of approximately 5 km/h, always keeping the impeller parallel to the ground. With the upper gauge and the SmartSpread™ lower gauge set in the desired positions, push the handlebar on/off lever forwards to the setting stop, while simultaneously starting forward motion. Always begin moving forward at the same time as pushing the lever forward to the on position. At the end of each run, pull the on/off lever back to the zero position to stop material flow and cease spreading. The spread width of the material varies with different fertilizer types. Always check the spread width of the product to ensure correct spread distances. Detailed information on the spread width of specific fertilizers can be found on the ICL websites or through ICL appointed retailers.
6: Cleaning and after-use instructions: Always empty any leftover product from the spreader when the application is complete, disposing of any excess material correctly. The best way to empty unused material from the hopper is by inverting the spreader. Further action may be required to clear any remaining material if necessary. Wash the hopper thoroughly with clean water particularly around the agitator and the underside of the hopper. Drying of excess water is recommended. Do not reuse the spreader until it is dry.