SPREADER PRIZELAWN PROFESSIONAL S/S
Stock Code:
FERTPLP
In Stock
General Features:
The newest instalment in the Prizelawn line, the PSR2K-PRO is a professional-grade broadcast spreader designed for accuracy, durability, and ease of use. Featuring Prizelawn’s Helical Cone Technology, stainless steel frame, 80lb hopper, and 13″ pneumatic turf-saver tires, it delivers a precise, uniform spread pattern while resisting rust and wear. Ideal for fertilizer, seed, ice melt, and more, this spreader includes a hopper cover, deflector, and ergonomic design for reliable performance season after season.
Specifications:
* 35kg Hopper capacity
* Superior spread accuracy with the Helical Cone Technology
* Top view slide rate flow plate for ease of setting
* Single side Stainless Steel Deflector
* 3rd hole shut off
* One touch positive on/off system
* Rust proof poly design
*Steel encased nylon bearing for reduced push resistance
* Self-lubricating Nylatron gears
* 13” Turf saver tread pneumatic tires, rustproof rims
* Hopper cover included
* Superior spread accuracy with the Helical Cone Technology
* Top view slide rate flow plate for ease of setting
* Single side Stainless Steel Deflector
* 3rd hole shut off
* One touch positive on/off system
* Rust proof poly design
*Steel encased nylon bearing for reduced push resistance
* Self-lubricating Nylatron gears
* 13” Turf saver tread pneumatic tires, rustproof rims
* Hopper cover included
Suitable For:
• Fairways
• Sports Fields
• Landscaping
• Maintenance
• Tees
• Lawns
• Sports Fields
• Landscaping
• Maintenance
• Tees
• Lawns
Application:
How to use
1) Check product bag for rate setting (letter), cone setting (number), and swath width.
The rate setting is achieved by loosening the rate control knob and sliding the rate control plate until the pointer aligns with the desired letter. The cone setting is used to control the spread pattern left and right and is adjusted by rotating the index tab on the orange helical cone to the desired number. Larger particle sizes will have a lower cone setting.
2) Pull the main shutoff lever to the closed position before filling the hopper.
3) Start rolling the spreader forward before opening the shutoff lever; close shutoff lever before stopping.
4) Hold the handle so the hopper is level. Tipping the spreader too far forward or backward will cause uneven spreading.
5) Use the swath width recommended on the bag for your model and push the spreader at 3 MPH (a brisk walking pace). Apply material in the forward direction.
6) The settings given on the product label are recommended starting points. Test rate and pattern on a small area before treating a large area. Actual application rate can vary depending on the weather, spreader condition, and walking speed.
7) The deflector shield is used to block off the right-side portion of the swath width. It should be used in the “ON” position (shield is down) together with the auxiliary shutoff in the “CLOSED” position (done by pushing the control knob forward).
IMPORTANT: Turf products will be applied excessively at the centre of the swath if the auxiliary shutoff is not closed when the deflector is in use. Always remember to re-open the auxiliary shutoff (pull the control knob back) when returning to a full swath width.
8) A hopper cover is provided with your new spreader. Use it to protect turf products inside the hopper from light rain or windy conditions during transportation.
1) Check product bag for rate setting (letter), cone setting (number), and swath width.
The rate setting is achieved by loosening the rate control knob and sliding the rate control plate until the pointer aligns with the desired letter. The cone setting is used to control the spread pattern left and right and is adjusted by rotating the index tab on the orange helical cone to the desired number. Larger particle sizes will have a lower cone setting.
2) Pull the main shutoff lever to the closed position before filling the hopper.
3) Start rolling the spreader forward before opening the shutoff lever; close shutoff lever before stopping.
4) Hold the handle so the hopper is level. Tipping the spreader too far forward or backward will cause uneven spreading.
5) Use the swath width recommended on the bag for your model and push the spreader at 3 MPH (a brisk walking pace). Apply material in the forward direction.
6) The settings given on the product label are recommended starting points. Test rate and pattern on a small area before treating a large area. Actual application rate can vary depending on the weather, spreader condition, and walking speed.
7) The deflector shield is used to block off the right-side portion of the swath width. It should be used in the “ON” position (shield is down) together with the auxiliary shutoff in the “CLOSED” position (done by pushing the control knob forward).
IMPORTANT: Turf products will be applied excessively at the centre of the swath if the auxiliary shutoff is not closed when the deflector is in use. Always remember to re-open the auxiliary shutoff (pull the control knob back) when returning to a full swath width.
8) A hopper cover is provided with your new spreader. Use it to protect turf products inside the hopper from light rain or windy conditions during transportation.